Pallet Racks

Quality Features

More Steel - Heavier, more rigid and durable rack
High Strength - One piece tub-seamed step beams with no exposed welds. Single rib frame design adds to strength and rigidity.
Extra-secure connections - Three high strength button-head studs on beam connector plates and tapered keyhole slots in frames for quick, easy assembly.
Safety - Factory installed, field replaceable self-engaging zinc plated cylinder clip safety locks are standard on all beams with 6" (3 stud) end connectors. Our 4" (2 stud) and 8" (4 stud) connectors have factory installed spring loaded pins.
Better Finish - A powder-coat baked polyester process on all major components which creates a durable appliance finish.

General Specification Notes

Rack components based on RMI 2002 specifications for Design, Testing and Utilization of Industrial Steel Storage Racks.
Beam capacities are based on uniformly distributed loading in pounds per shelf (pair of beams) and are for beam components only. Overall rack configuration is the responsibility of others.
Frame capacities are for frame components only. Overall rack configuration is the responsibility of others.
Applicable for non-seismic use only. Building codes may require otherwise.
Contact TRI-BORO for design assistance and/or applications not covered by above.
Wire Mesh Decking made of cold-drawn steel, waterfall design, 2" x 4"; 4 gauge mesh.

Upright Frames 3" x 2 ¹/₂"

Model No.	Description	Weight (lbs.)	Capacity
TBS-3696-F20-G	FRAME 36" x 96"	49.0	20,059
TBS-4296-F20-G	FRAME 42" x 96"	50.0	20,059
TBS-4896-F20-G	FRAME 48" x 96"	51.0	20,059
TBS-42120-F20-G	FRAME 42" x 120"	58.0	20,059
TBS-36144-F20-G	FRAME 36" x 144"	73.0	20,059
TBS-42144-F20-G	FRAME 42" x 144"	74.0	20,059
TBS-48144-F20-G	FRAME 48" x 144"	76.0	20,059
TBS-42192-F20-G	FRAME 42" x 192"	95.0	20,059

Step Beams

Model No.	Description	Weight (lbs.)	Capacity
TBS-448-SB-O	STEP BEAM 4 1/8" x 48"	12.5	8,775
TBS-372-SB-O	STEP BEAM 3 1/2" x 72"	15.0	4,743
TBS-296-SB-O	STEP BEAM 2 1/2" x 96"	21.3	1,735
TBS-496-SB-O	STEP BEAM 4 1/8" x 96"	23.0	5,028
TBS-596-SB-O	STEP BEAM 5 1/8" x 96"	28.0	7,596
TBS-5108-SB-O	STEP BEAM 5 1/8" x 108"	26.0	4,011
TBS-5120-SB-O	STEP BEAM 5 1/8" x 120"	35.0	5,887
TBS-6144-SB-O	STEP BEAM 6" x 144"	54.0	6,511

Wire Deck (Waterfall Design)

Model No.	Description	Weight (lbs.)	Capacity
TBS-3646-WB-GP	WIRE DECK 36" x 46"	22.0	3,000
TBS-4246-WB-GP	WIRE DECK 42" x 46"	26.0	2,500
TBS-4846-WB-GP	WIRE DECK 48" x 46"	30.0	3,000
TBS-3658-WB-GP	WIRE DECK 36" x 58"	29.4	3,000
TBS-4258-WB-GP	WIRE DECK 42" x 58"	34.2	3,000
TBS-4858-WB-GP	WIRE DECK 48" x 58"	39.0	3,000

HOW TO ORDER

BEAM LENGTH: Shelf length equals the distance between uprights. It is determined by adding the widths of pallet loads plus a 5" side clearance between upright and pallet and 6" between pallet loads. Shelf beam capacities are based on a pair of beams supporting an evenly distributed load.

RACK HEIGHT: Add the following figures:

Height of pallet loads (including pallet)

+ Height of shelf beam

+ 4" minimum vertical clearance for each pallet load

_______________________________________

Sum of above dimensions = Rack Height

For upper most load level, location of shelf beam should be 6" less than fork truck's maximum lift height.