Made of 14 gauge steel, roll formed into a 1" x 1-7/8" angle. The wide flange is pierced on 1-1/2" centers with 7/16" square slots to receive shelf clips and 5/16" diameter hole. 1-1/2" centers for the attachment of side sway braces or solid panels.
| Model Number | Size | Weight |
| OP37 | 3'1" | 2.0 lbs |
| OP49 | 4'1" | 3.0 lbs |
| OP61 | 5'1" | 4.0 lbs |
| OP73 | 6'1" | 4.8 lbs |
| OP85 | 7'1" | 5.5 lbs |
| OP97 | 8'1" | 6.0 lbs |
| OP109 | 9'1" | 7.0 lbs |
| OP121 | 10'1" | 8.0 lbs |
| OP133 | 11'1" | 8.8 lbs |
| OP145 | 12'1" | 9.5 lbs |
| OP169 | 14'1" | 11.0 lbs |
ROLLED FORMED POST
A 1-1/4" x 1-1/4" angle made from 13 gauge rolled formed steel with holes punched on 1" centers.
A 1-1/4" x 1-1/4" angle made from 13 gauge rolled formed steel with holes punched on 1" centers.
| Model Number | Size | Weight |
| RFP39 | 3'3" | 2.7 lbs |
| RFP51 | 4'3" | 3.5 lbs |
| RFP63 | 5'3" | 4.4 lbs |
| RFP75 | 6'3" | 5.2 lbs |
| RFP87 | 7'3" | 6.0 lbs |
| RFP99 | 8'3" | 6.9 lbs |
| RFP111 | 9'3" | 7.7 lbs |
| RFP123 | 10'3" | 8.5 lbs |
This clip-type post eliminates items being snagged during loading and unloading. Rectangular holes for clips punched on 1-1/2" centers and 5/16" diameter holes 1-1/2" on center as above. Made from 14 gauge steel.
| Model Number | Size | Weight |
| BP37 | 3'1" | 2.2 lbs |
| BP49 | 4'1" | 3.4 lbs |
| BP61 | 5'1" | 4.5 lbs |
| BP73 | 6'1" | 5.4 lbs |
| BP85 | 7'1" | 6.3 lbs |
| BP97 | 8'1" | 7.2 lbs |
| BP109 | 9'1" | 8.1 lbs |
| BP121 | 10'1" | 9.0 lbs |
13 gauge hot-rolled steel 1" x 1-3/4" with 1" centers.
| Model Number | Size | Weight |
| GP75 | 6'3" | 4.9 lbs |
| GP87 | 7'3" | 5.7 lbs |
| GP99 | 8'3" | 6.5 lbs |
Call for Your Quick Quote!
Tri-Boro Shelving & Partition Corporation
300 Dominion Drive, Farmville, VA 23901
1-800-633-3070
Tel: 434-315-5600 / Fax: 434-315-0139
Tri-Boro Shelving & Partition Corporation
296 Wythe Avenue, Brooklyn, N.Y. 11211
Tel: 718-782-8527 / Fax: 718-963-0457